Lenze Ac Tech Manual Fault Codes. Vfd error codes some vfd issues can be resolved before requesting service. The faults that the ga7200 detects are classified into faults and alarms.
A listing of lenze ac tech support and service contacts can be found on the internet at www. This video will cover diagnostic fault monitoring, checking fault history and troubleshooting the lenze ac tech smvector variable frequency drive (vfd). For 400.480 vac models, the output current maximum (%) in the 480v column is used when p107 = 1.
A Blank Epm, Or Epm With Corrupted Data Has Been Installed.
Lenzeactech.com/drives and selecting support and library. Lenze ac tech does not accept any liability for deficiencies claimed subsequently. This means that the inverter is queried every 10 milliseconds by the scanner.
Diagnostic Codes Af High Temperature Fault:
Chapter 6 fault code information and maintenance 6.1 fault code information the ac motor drive has a comprehensive fault diagnostic system that includes several different alarms and fault messages. Commissioning code possible settings important name default selection sleep recovery 0 recovery if speed setpoint > p240 mode or if pid feedback differs from setpoint by more than p242 1 recovery only if feedback < p246 2 recovery only if feedback > p246 auto rinse in sleep 0 disabled activated in sleep mode only. Although most issues that occur with the smv are setup issues, there can be faults that may occur during normal operation of the drive.
This Video Will Cover Diagnostic Fault Monitoring, Checking Fault History And Troubleshooting The Lenze Ac Tech Smvector Variable Frequency Drive (Vfd).
Lenze 13466184 edbsl03 v20 en, de. For 400.480 vac models, the output current maximum (%) in the 400v column is used when p107 = 0. It is neither a machine nor a device ready for use in accordance with european directives (reference machinery directive and electromagnetic
Power Was Removed For Longer Than 3 Minutes.
A listing of lenze ac tech support and service contacts can be found on the internet at www. Lenze ac tech corporation also holds no liability for losses of any kind which may result from this action. If a problem occurs, the fault contact is output and the motor coasts to a stop.
Capacitors Retain Charge For Approximately 180 Seconds After Power Is Removed.
Lenze smvector 13465100 edbsv01 en. Our frequency inverters reliably adjust the speed and control the torque. 12 english commissioning code possible settings important no.